SY CAMARA
  • Home
  • About
  • GALLERY
  • CONTACT
  • SPONSORS
    • Norsand
    • Ocean Home & Yacht / David Alan-Williams
  • Blog

BLOG

BELOW IS OUR BLOG ARCHIVE. WE HAVE MADE THE CHANGE TO SHARING OUR JOURNEY ON YOUTUBE & SOCIAL MEDIA - HOPE TO SEE YOU THERE. GIVE US A LIKE, FOLLOW & MAKE SURE TO SUBSCRIBE :-)

Progress on the hard dodger & deck

6/5/2017

1 Comment

 
Yesterday Peter sprayed the primer on the new hard dodger and it looks pretty awesome! More fairing and sanding to go as usual and more work awaiting in the cockpit in general such as filling holes, sorting the new aft entrance hatch, two new hatches for the aft cabins, stainless posts for the dodger etc. Due to the sheer size of an area we are prepping and painting in stages and will also get the sugar scoop prepped and painted before we move further forward on the deck. Here is what it looks like after the primer coats:​
While it is certainly a touch higher than we would have liked, we did measure the topsides (to put it in perspective) and believe it will look just fine, especially with the boom running at the same height as the first step in the dodger. Considering the amount of shelter we are getting from the weather and sun without sacrificing too much clear vision from the helm - it's safe to say we are pretty wrapped with the outcome!

While we are giving the paint a few days to cure properly, Peter has moved on to making the stainless posts which will support the aft of the dodger roof. We will also have additional posts from the helm post to the dodger roof to give us something solid to hold on to with the thought in mind that we may want to put a panel with our instrument displays there as well. 

Peter is in his element being full-time on the boat now and with me back to full-time work, any 'spare' time I have I'm cleaning up bolts for the toe rails and for any hardware that we took off - and oh boy are there hundreds of bolts, washers and nuts or what? Not the most thrilling of jobs but quite a mellow one as Peter set up a bench grinder on the work bench inside the boat so quite easy and convenient really and saves a few $ that we would rather spend on other stuff!​ Here is a before and after - definitely nice to see them all shiny again :-)

I have also received the last few logos and bits from one of our sponsors so I will be updating the supporters page this weekend also, so keep your eyes peeled for updates on the website :-)
1 Comment
Cameron
11/7/2017 03:21:45 am

Amazing!

Reply



Leave a Reply.

    Archives

    May 2020
    April 2020
    March 2020
    January 2020
    December 2019
    November 2019
    October 2019
    September 2019
    August 2019
    July 2019
    June 2019
    May 2019
    April 2019
    January 2019
    December 2018
    September 2018
    August 2018
    July 2018
    June 2018
    May 2018
    March 2018
    February 2018
    January 2018
    December 2017
    November 2017
    October 2017
    September 2017
    August 2017
    July 2017
    June 2017
    May 2017
    April 2017
    March 2017
    February 2017
    January 2017
    December 2016

    Categories

    All

    RSS Feed

Contact Us

© 2016-2022  www.camarasailing.com  ALL RIGHTS RESERVED
  • Home
  • About
  • GALLERY
  • CONTACT
  • SPONSORS
    • Norsand
    • Ocean Home & Yacht / David Alan-Williams
  • Blog